My detailed dildo user guide has a small section with some tips and techniques for using suction cup dildos. One helpful idea to think about in terms of practicality is the large bottom ornament, which is used to grab from. This allows for tighter control and functionality while in use and provides a more individualized experience. However, if you want to mount your dildo on the wall for a more adventurous experience, then these tricks below will help you ensure that your dildo sticks to the wall surface easily.
Make sure the surface area is without debris
This step is necessary to obtain a good vacuum. You need to be especially careful to get all soap residue and limescale off if you want to put the dildo on the bathtub edge or shower tiles. For a strong vacuum force to be generated, an unblemished surface free from irregularities is required. In fact, any air penetrations or impurities on the surface can significantly reduce the vacuum strength that is created around the suction cup’s edges. Detergent residue, for instance, can interfere with the butt connection that occurs all the way around the cup, thus limiting its ability to create a vacuum and a perfect seal. So, spend adequate time to thoroughly clean the area where the dildo will be fixed so that it is free from dirt or debris that may interfere with the vacuum process. Use a soft fabric with a light cleanser to carefully clean the surface, going throughout the dirt and deposit marks. A solid surface will ensure the suction is more powerful, as well as lengthen the life of your suction cup over time, preventing it from getting weak over time and ensuring a more pleasurable and reliable experience whenever you break out your sex device.
Wet the inside of the cup slightly
Moistening the concave part of the suction cup can greatly increase the adhesive strength; it will be much stronger than if you dry it. However, it is important to be careful and not go beyond the limit. If too much moisture gets applied so the suction cup sex toy does not stick, it may slip when pressure is applied to cement it to the surface it goes onto. Moistening: Using a slightly damp finger to gently wipe the inside of the cup to provide a small amount of lubrication. It is not just putting a lot of liquid on top of a substrate and then saying you covered it. This tiny balance of dew is to make a better packing between the cup and the surface, which allows us to make a better suction without the adverse effect of slipping. Some moisture can fill the small irregularities in the surface of the suction cup and the wall, increasing the adhesive force and forming closer contact. You can even adjust moisture levels to find the right balance for the surface you are using and the situation. Be careful with how you engage the suction and give it a test for how well it will stay in place.
Assess Your Angle of Penetration
Using a suction cup dildo on the wall is hugely dependent on where your body is positioned. It is important to ensure the angle is fit for vaginal placement. The conventional angle in such cases is to use a bent shaft. The end of the dildo will angle for a second screen when the curved shaft is secured to the wall. This is a nice upward angle for the femur so that a girl can “back up” or kneel down relatively conveniently and properly positioned and make its way inside of her vagina with minimal resistance. The curve can also help focus only on specific pleasure sites in the vagina, which will lead to more intense and satisfying sensations. Especially when using doggy style, smaller or svelter dildos are easier to implant for beginners. These dildos are less intimidating and can help to allow for a more incremental exploration and adjustment to the experience. Of course, a curved penile shaft is not a must-have. A straight penile shaft might also do; however, in this case, it has to be put simply level on the ground, and you have to squat explicitly onto it. That requires a more precise alignment of the body to ensure a comfortable experience and proper insertion. Depending on the depth you wish to insert, you may have to literally fine-tune your angle of insertion with your body accordingly. Try different angles and body positions to find what is comfortable and pleasurable for you. These are a few things to consider to enhance your solo or partnered suction cup dildo experience.
Following these steps and taking these factors into consideration when using a suction cup dildo will help you maximize your suction cup dildo experience, ensuring safety while also making it more pleasurable. Whether you are a total newbie looking to experiment with new sexual activities or an experienced user wanting to elevate your routine, these tips will help ensure you have a more enjoyable and fulfilling experience with your suction cup dildo. Always make your comfort and well-being the priority, and don’t be afraid to try things out and see what works for you. With the right techniques and a touch of patience, your suction-base dildo can provide a whole new world of stimulation and fun.